Can I use Huawei ONU MA5626 as a switch?

Can I use GPON ONU MA5626 as a switch?

Huawei MA5626 is not recommended as a switch. 

During routine operation and maintenance, you can configure the MA5626 as a switch through command lines if needed. 

1. Log in to the MA5626. The default user name and password are root and mduadmin respectively. 

2. Enter config mode. 

cmd: 

MA5626>enable

MA5626#config

MA5626(config)#

3. cmd:

vlan service-profile profile-id 1 profile-name "srvprof-1"//Configure a VLAN service profile. 

user-bridging enable //Enable the user bridging mode. 

commit //Confirm and execute the command. 

4. cmd: 

vlan bind service-profile 100 profile-id 1 //Bind the VLAN to be configured for a port to the VLAN service profile. 

5. cmd: 

service-port vlan 100 eth 0/1/1 multi-service user-vlan untagged  rx-cttr 6 tx-cttr 6 //After configuring port data, configure the MA5626 as a switch.