Configuration Difference Between IPv6 and IPv4 on Huawei ONT

For the bridging ONT, configurations for IPv6 and IPv4 are the same. For the gateway ONT, the HSI service configurations for IPv6 and IPv4 are different.

Configuring the IPv6 WAN Port on the Gateway ONT

For IPv6 IPTV multicast service, no extra configuration is required. For the IPv6 HSI service, the Internet WAN port on Huawei gateway ONT must be configured (only Internet WAN port supports IPv6). If the gateway ONT uses the IPv6/IPv4 DS scheme, select IPv4/IPv6 for Protocol Type. If the gateway ONT uses the DS-Lite scheme, select IPv6 for Protocol Type. For details, see Figure 1.

Figure 1 Configuring the IPv6 WAN port 

Configuring the IPv6 Address of the LAN Side on the Gateway ONT

The gateway ONT like HG8245H can be configured to allocate IPv6 addresses to the terminals after IPv6 is introduced. For details, see Figure 2.

Figure 2 Configuring the IPv6 address on the LAN side 

Configuring the Static IPv6 Route on the Gateway ONT

The gateway ONT can be configured with the static IPv6 route after IPv6 is introduced. For details, see Figure 3.

Figure 3 Configuring the IPv6 static route 

Which slots on Huawei DWDM equipment can be inserted into TN11M4002?

It depends on DWDM models, before buying Multiplexing Board TN11M4002 spare part, you need check your your device lots, because TN11 occupies 3 slots, which TN12 only occupies 2 slots.

OSN 8800 T64 subrack: IU1-IU6, IU11-IU16, IU19-IU24, IU27-IU32, IU35-IU40, IU45-IU50, IU53-IU58, IU61-IU66.

Huawei OSN 8800 T32 subrack: IU1-IU6, IU11-IU17, IU20-IU25, IU29-IU34. 

Huawei OSN 8800 T16 subrack: IU1-IU6, IU11-IU16. 

Huawei OSN 8800 platform subrack: IU1-IU14. 

Huawei OSN 6800 subrack: IU1-IU15.

Can we use SFP single fiber bi-directional modules on GICF?

A: Yes, you can.

Q: Can 2-port 10G uplink card X2CS support 10G BIDI SFP+ modules?
A: Yes, they are in same situation.


Q: Can I use non-original SFP or SFP+ on X2CS and GICF?
A: Yes, there are Huawei compatible and Huawei original module in the market, both can applied to Huawei GPON OLT devices.

Is there any hardware updates of Huawei MA5800 latest version V1R18?

Huawei SmartAX MA5800 multi-service access module is the industry's first smart Huawei NG-OLT. As a next-generation OLT that employs a distributed architecture, MA5800 supports ultra-broadband, fixed mobile converged services, and smart capabilities. It is the most advanced OLT for NG-PON in the industry, catering to the demand for a broader, faster and smarter access network for the ultimate
service experience.

Compared with MA5800 V1R16 R17, there are some hardware updates in MA5800 R18.

1, H901OXHG-24-port 10GE/GE optical interface board, providing Ethernet optical access. It supports up to 24 channels of 10GE/GE P2P access services, and is applicable to Ethernet access.

2, H901BPLD-Backplanes for Huawei MA5800-X17 R18 service subrack, the maximum bandwidths per slot are 400 Gbit/s.

What's the difference between Huawei MA5800 control board H901MPLA and H902MPLB?

Huawei released H902MPLA in Huawei MA5800 R18  Hedex, so many customers think the two version has function difference.

Actually no function difference, only appearance, H902 is higher than H901. Huawei made some optimization.

H902MPLA and H901MPLA price is the same. Some customer prefers to new version H902MPLA, and some think it does not matter.

What's the difference between Huawei S6720S-26Q-LI-24S-AC and S6720S-26Q-SI-24S-AC?

Specification of S6720S-26Q-LI-24S-AC and S6720S-26Q-SI-24S-AC are same, both are Huawei 2x40GE QSFP+ switch.and 24x10GE SFP+ switch.

Difference:

1,  version is not same, LI and SI.

2, Switching capacity
S6720S-26Q-SI-24S-AC:  2.56Tbps/23.04Tbps
S6720S-26Q-LI-24S-AC: 1.28Tbps/12.8 Tbps

3, power supply
S6720S-26Q-SI-24S-AC has two power slots powers are pluggable, while S6720S-26Q-LI-24S-AC is fixed AC power.

If you have no requirement for higher switching capacity, you can choose LI, because S6720S-26Q-LI-24S-AC price is cheaper than SI.

How to configuration HG8010H MAC Filter?

1, In the navigation tree on the left, choose Security > MAC Filter Configuration. In the pane on the right, after enabling MAC filter and selecting the filter mode, click New. On the dialog box that is displayed, configure the MAC filter rule for the PC to access the Internet, as shown in Figure 1.

2, Click Apply

The MAC address lists of PCs in the network are saved on the GPON ONT HG8010H. Configuring MAC filter rules enables the PCs that conform to the rules to access the Internet service or disables the PCs that do not conform to the rules to access the Internet service. A PC may have more than one IP addresses but a unique MAC address. Therefore, configuring MAC filter rules effectively controls the Internet service access rights of PCs in a LAN.

Questions and Answers about Huawei OSN 1500B and Q2CXL1

Q: I buy a Huawei OSN1500B equipped with Q2CXL1, but there will be 622M service, can I change STM-1 module of Q2CXL1 to STM-4 directly?

A: No, you cannot. Q2CXL1 only supports STM-1 eSFP, cannot support STM-4 eSFP.

Q: Then only I can do is buy a Q2CXL4?
A: Yes, you have to change the board.But I suggest you buy Q5CXLLN, it supports STM-1, STM-4 and STM-16 module.

Q: Huawei OSN 1500B Q5CXLLN is perfect, but is there any price difference?
A: Of course, Q5CXLLN is much more expensive than Q2CXLN,not only because Q5 version is universal for STM-1, STM-4 and STM-16 module, but also Q5 version has higher cross-connect capacity than Q2.

Q: Can you tell me their cross-connect capacity difference, that I can have a better evaluation.
A: Higher order cross-connect capacity of Q2CXLN is 20Gbit/s, Q5CXLLN is 60Gbit/s, threes times than Q2CXLN.

These are real dialogue between our costumer and our service person, there share out, hope they are useful.

What boards on Huawei DSLAM device can support vectoring function?

H83BVCLE (32-channel VDSL2 over POTS), H83BVCLF (32-channel VDSL2), H83BVCMM and  H83DVCMM(48-channel VDSL2) on Huawei MA5616 & MA5600 can support.

Huawei 32-channel VDSL2 over POTS board VDLE does not support.

Remarks:
These vectoring service boards need work with enhanced subrack MABB, main control board CCUE and power board PDVAA, then can realized vectoring.

Some questions and Answers about HG8546M that ISP encountered

Q: We bought Huawei ONT HG8546M, but when we add it to our network , the V1R9 U2000 is asking for a XML file related to HG8546M, what's the problem?

A: From your sreenshot,it is a "capability.XML" file, which is contained in the U2000 version file,your R9 U2000 have Huawei ONT R12, R13 capability.XML, but have no R16 or later capability.XML., so you need a new version U2000 with ONT R16 or later capability.XML.included.

Q: In our network, we only have R9 U2000 to manage Huawei OLT ONT, do you have one with newer version?

A: We have R14 U2000 at hand, but it hasn't been installed yet, because we have a Huawei OSN 6800 project which needs R9 U2000.

Q: May I have R14 U2000 for testing my HG8546M?

A: You can send email to supports@thunder-link.com, and they will response you very soon.

What is the difference of monitor modules SMU01A, SMUO1B, SMU01C on Huawei ETP4890?

Because Huawei MA5600T, OSN 8800, OSN3500 is DC power, when you buy Huawei OLT or WDM devices, you need to choose a AC/DC converter to meet your AC plat; ETP4890-A2 is a very normal converter, there are three kinds of modules, what are the difference of these modules?

1, SMU01A can support WebUI remote manage function, SMU01B and SMU01C cannot support WebUI feature.

2,  SMU01B supports Huawei master/slave protocols and access network point-to-point protocols, which allows Huawei access network communications equipment to connect to the U2000.

Is the System Clock Correct After the Switch IS Powered Off

Versions Earlier Than V100R006
The system clock of the switch is implemented by the software. The system saves the system
clock if the switch is powered off and restarted manually. If the switch is powered off due to a
power failure, the system time is restored to the factory setting.

V100R006 And V200R001
The system clock of Huawei S3700HI&S5700HI&S6700 like 48 ports 10G Switch S6720-54C-EI-48S is implemented by the hardware. The system obtains the clock from the hardware if the switch is powered off and restarted manually. The system clock of other models except the S3700HI&S5700HI&S6700 is implemented by the software. The system saves the system clock if the switch is powered off and restarted manually. If the switch is powered off due to a power failure, the system time is restored to the factory setting.

V200R002 And V200R003
The system clock of the S5700HI&S6700 is implemented by the hardware. The system
obtains the clock from the hardware if the switch is powered off and restarted manually. The
system clock of other models except the S5700HI&S6700 is implemented by the software.
The system saves the system clock if the switch is powered off and restarted manually. If the
switch is powered off due to a power failure, the system time is restored to the factory setting.

V200R005 And Later Versions
The system clock of Huawei S5700 and Huawei S6700 is implemented by the hardware. The system obtains the clock from the hardware if the switch is powered off and restarted manually. The system
clock of other models except the S5700HI&S6700 is implemented by the software. The system saves the system clock if the switch is powered off and restarted manually. If the switch is powered off due to a power failure, the system time is restored to the factory setting.

Does Huawei S6720S-26Q-LI-24S-AC support extension slots?

Huawei S6720-LI series switches (S6720-LI) are next-generation simplified 10GE fixed switches and can be used as 10GE access switches on campus networks and data center networks. 

The S6720-LI provides line-rate 10GE access ports and 40GE uplink ports. In addition, the S6720-LI delivers a wide variety of services, comprehensive security control policies, and various QoS features to help customers build scalable, reliable, manageable, and secure campus and data center networks.

Huawei S6720S-26Q-LI-24S-AC supports:

• 24-ports 10GE SFP+, 2-ports 40GE QSFP+
• With 1-AC power fixed
• Forwarding performance 240Mpps
• Switching capacity 1.28Tbps/12.8 Tbps
• 32K MAC address entries
• But does not support extension slots.

Can we install an air-conditioner above Huawei MA5800 X7?

Some areas are very hot, so after buying Huawei MA5800 X7 some people wonder if can install an air-conditioner above Huawei MA5800 to protect.

Our answer is:

Do not install the air-conditioner above the equipment and ensure that the air exhaust vent of the air-conditioner is not directly towards the equipment. Keep the air-conditioner away from a window as possible to ensure that no moisture from the window is blown towards the equipment through the air-conditioner.

What is the difference between Huawei N1SLD64 and N4SLD64?

There are many people asked board version difference when they need replace or add service board on Huawei device such as Huawei OSN 3500, OSN 8800.

Below is an comparison between Huawei STM-64 service boards version difference.

 N4SLD64  VS N1SLD64

1, N4SLD64 supports CWDM and DWDM colored optical interfaces, whereas the N1SLD64 does not.
2, N4SLD64 supports single-fiber bidirectional optical modules, whereas the N1SLD64 does not.
3,  N4SLD64 detects and reports voltage performance, whereas the N1SLD64 does not.
4, N4SLD64 supports the PRBS function, whereas the N1SLD64 does not.

Do you know Huawei S7700 switch and some important notes?

Huawei S7703: Supports two Main Control Units (MCUs), three Line Processing Units (LPUs), and AC or DC power modules in 1+1 backup mode.

S7706: Supports two Switching and Routing Units (SRUs), six LPUs, and AC or DC power modules in 1+1 or 2+2 backup mode.

S7712: Supports two SRUs, twelve LPUs, and AC or DC power modules in 1+1 or 2+2 backup mode.

• The S7703 chassis integrates the PoE and non-PoE models. The S7706 and S7712 have PoE chassis and non-PoE chassis. A PoE chassis is identified by PoE on the nameplate and power supply slots.
• Huawei S7700 switch includes FCC-certified chassis and common chassis.

What is the Working modes of Huawei EoS board EGS4?

What is the Working modes EGS4 on Huawei OSN 3500?

1, GE electrical port (N1EGS4): auto-negotiation, 1000M full-duplex.

2, GE electrical port (N4EGS4): auto-negotiation, 1000M full-duplex, 100M full-duplex, and 10M full-duplex.

3, GE optical port: auto-negotiation and 1000M full-duplex.

Note: Only on N1EGS4 and N4EGS4 boards support GE electrical port.

Does Huawei NG-OLT MA5800 Support AC power?

Huawei NG-OLT MA5800 is the industry's first smart aggregation OLT with a distributed architecture. It is positioned as the next-generation OLT for NG-PON. The product is designed to help carriers build networks with larger bandwidths, higher speeds, and smarter connectivity to deliver better service experience.

MA5800 series has 4 model, MA5800 X17, X15, X7 and X2.

MA5800 X17, X15, X7 only has DC power card like Huawei MA5600T and MA5603T; MA5800 X2 can support AC or DC power.

Because high performance, MA5800 is getting more and more popular in global, although MA5800 price is a little more expensive than MA5800T.