How to add eNodeB to U2000 Network Management System?

Firstly it is necessary to download an U2000 client to local PC. In addition, we need to login into OSMU server as user ossuser to install the software mediation. If we are going to add an EnodeB, DBS software and mediation must match, otherwise we cannot add the site to the U2000 server.
Secondly a connection between U2000 and NE must be established. IP route and device IP configuration should be configuted on NE side. We can use Web LMT for this configuration. 

1) Installation the Mediation Software and Network Connection
UseOSMU platform to install mediation file.
We can login into OSMU platform using 31123 port. Login information has been provided.
User: "ossuser" and Password: "Changeme_123"
- After login was successfully, we will select general tab and navigate to the mediation package management. (click the Mediation Installation tab in the right pane). 
- The tab page for installing mediation software is displayed. Click Upload in the Upload Mediation Package area and then specify the installation package of the mediation software to be uploaded. You need to ensure that the language version of the selected installation package is consistent with the language version of the U2000 server application..
If many pieces of mediation software are available for installation in Mediation Packages to be Installed, click Show Only Med Not Installed to sort the mediation software that has not been installed.

2) Adding IPRT and DEVIP in order to reach NE from U2000 server.
In this section we should login with Ethernet cable to the base station.You can loginto NE by using UMPT default IP which is 192.168.0.49.
User: "admin" and the Password: "hwbs@com"
After loginprocess has finished, we will add DEVIP and IPRT that will use for connection.

IP address will be our OM IP. Inaddition, we have to consider the port number.

If you have other problem about U2000 or Huawei MSTP DWDM equipment, you can contact our technical support team supports@thunder-link.com