How to change acc. and pass of MA5670 Series ONT?

When you get a replacement MA5670 series GPON ONU like MA5671, MA5675, MA5871, you wish amendment its account and arcanum through other ways. this text lists the procedures of adjusting arcanum through online page, interface and BMS.

Changing the root (web) pass:

1. Log in to the online page as root or telecomadmin.

2. Navigate to Account: Maintain -> Account.

3. amendment the pass on the account interface, and click on Apply.

Changing the root(cli) pass:

Change the root(cli) pass through the interface.

1. Connect a laptop to Huawei GPON ONT and log in to the ONT by telnet.

2. Run the set userpasswd root command to vary the pass.

===========================

WAP>set userpasswd root

old password:*****

new password:***********

reenter new password:***********

Password of root has been changed successful!

success!

WAP>

===========================

Change the root(cli) pass through the BMS.

I. (Optional) Add a general ONT VAS profile.

Note: If there's associate ONT VAS profile, choose this profile, right-click, and select Modify from the road menu.

a) From the most menu, select Configuration > Access Profile Management. In the

navigation tree of the tab page that's displayed, select PON Profile > ONT VAS Profile.

b) On the final ONT VAS Profile tab page, right-click, and select Add from the

shortcut menu.

c) within the panel that's displayed, set Name of the final VAS profile, and

configure the WAN port info and voice service parameters for the ONT.

d) Click Next.

e) within the panel that's displayed, set marketer ID, Terminal sort, and Version,

click Add.

f) within the panel that's displayed, put together parameters of the final ONT VAS

profile supported needs.

II. Export the ONT VAS Profile to be modified.

In the Add ONT VAS Profile panel, click Export to export associate XML configuration file.

III. We can use Document (Text) to open the exported XML file.

IV. Add the subsequent contents and save the file.

=============================

<UserInterface>

<X_HW_CLIUserInfo NumberOfInstances=”1”>

<X_HW_CLIUserInfoInstance InstanceID=”1” Username=”root” Userpassword=”12345”

UserGroup=”” ModifyPWDFlag=”0”/>

</X_HW_CLIUserInfo>

<X_HW_WebUserInfo NumberOfInstances=”1”>

<X_HW_WebUserInfoInstance Enable=”1” InstanceID=”2”

Password=”UD3F450BF1420B1D1EC4FC28B83634BB” UserLevel=”0”

UserName=”e6588EED7B47E466BE215DD0D1239256”/>

</X_HW_WebUserInfo>

</UserInterface>

=============================

Note:

- Fill within the arcanum being modified. The BMS mechanically encrypts the arcanum.

- Username is that the user name and Userpassword is that the arcanum. The user info is modified by dynamic  Username and Userpassword.

- The default user name of a typical user is root. The user name is modified. The common user arcanum within the preceding figure is Admin&123.

V. Import the modified XML file to the BMS.

a. From the most menu, select Configuration > Access Profile Management. within the navigation tree of the tab page that's displayed, select PON Profile > ONT VAS Profile.

b. choose the created profile, right-click, and select Modify from the road menu.

c. within the panel that's displayed, click Next.

d. choose the record wherever Terminal sort is about to OntGnlrType, right-click, andmchoose Modify from the road menu.

e. within the panel, click Import, and choose the XML configuration file to be foreign within the window that's displayed.

f. Click OK.

6. Bind the modified General VAS Profile to the desired ONT.

a. within the Physical Map navigation tree on the most Topology tab page, double-click

the target OLT, or choose the target OLT, right-click, and select NE soul.

b. within the navigation tree, select GPON > GPON Management.

c. within the window on the correct, select GPON ONU.

d. On the GPON ONU tab page, set the search criteria to search out the GPON ONU records.

e. choose associate ONT from the list, right-click, and select Bind General VAS Profile from the road menu. within the panel that's displayed, choose the created profile, and click on okay to complete profile binding.

Changing the telecomadmin pass

1. Log in to the BMS, choose the ONU whose telecomadmin arcanum must be modified, right-click, and select Maintain ONT(Z).

2. In the panel that's displayed, choose Modify Login arcanum.

3. choose Admin from the User level drop-down list, input a replacement arcanum in pass, and click on Config.

How to enable remote access control for Huawei ONT?

 This article will introduce that how to enable the remote access function for Huawei GPON ONT.

To simplify access network maintenance, you can enable the function of remotely controlling Huawei ONTs. Generally, you can use the following methods:

Method 1: Enable WAN Access Control on Web page

1. Log in to the web page of the device, In the navigation tree on the left, choose Security > WAN Access Control Configuration. In the pane on the right, click New. In the dialog box that is displayed, set the parameters of the WAN access control. 

2. Then click Apply.

Method 2: Enable Remote Management from ACS

1.Create a WAN Connection on ONT (Routing+Vlan 507+DHCP):

 In the navigation tree on the left, choose WAN > WAN Configuration. In the pane on the right, click New. In the dialog box that is displayed, set Parameters as shown below:

Click Apply.

ONT should receive the IP through DHCP after this step. Check Status at System Information > WAN Information. In the pane on the right, you can view the status of the WAN interface.

2. Next Configure TR069 settings for Remote Management from ACS:

In the navigation tree on the left, choose System Tools > TR-069. In the pane on the right, set the parameters related to the interconnection between the ONT and the TR-069 server

Click Apply.

Method 3: Enable Remote Login Web Page by U2000

1. Configure an ONT general VAS profile.

a. From the main menu, choose Configuration > Access Profile Management. In the navigation tree of the tab page that is displayed, choose PON Profile > ONT VAS Profile.

b. On the General ONT VAS Profile tab page, right-click, and choose Add from the shortcut menu.

c. In the dialog box that is displayed, set Name to ONT.

d. Configure static WAN parameters.

In the navigation tree, choose General Para > WAN Device > WAN Device 1 > WAN Connection. Select WAN Connection, right-click, and choose Add IP Connection from the shortcut menu. Select WAN IP Interface1 and add a static WAN interface.

• Set WAN Enable to Enable.
  

• Set Connection Type to Routed.

• Set Vlan ID the same as the CVLAN ID of the traffic streams configured on the OLT.

• Set Addressing Type to Static.

e. Click Next.

f. In the dialog box that is displayed, set vendor ID to HWTC, Terminal Type to General Type, and Version to V1R003C00-ZZ, click Add.

g. In the dialog box that is displayed, choose General Type Config Info > WAN Device > WAN Device 1 > WAN Connection > WAN Connection 1 > WAN IP Interface > WAN IP Interface 1, set WAN Interface Name to ONT and Service Type to INTERNET.

h. Enable the access rights on the WAN.

In the navigation tree, choose General Type Config Info > Security > ACL Services. On the right pane, set HTTP WAN Enables to enable. Then click OK.

2. Bind a general VAS profile.

a. In the Physical Map navigation tree on the Main Topology tab page, double-click the target GPON OLT, or select the target OLT, right-click, and choose NE Explorer.

b. In the navigation tree, choose GPON > GPON Management.

c. In the window on the right, choose GPON ONU.

d. On the GPON ONU tab page, set the search criteria to find the GPON ONU records.

e. Select an ONT from the list, right-click, and choose Bind General VAS Profile from the shortcut menu. In the dialog box that is displayed, select the created profile, and click OK to complete profile binding.

3. Configure the ONT VAS.

a. On the GPON ONU tab page, select an ONT, right-click, and choose Configure Value-Added Service from the shortcut menu.

b. Click the Basic Parameters tab in the dialog box that is displayed, select WAN Port, and set IP Address, Subnet Mask, and Default Gateway.

3. Click OK. The configurations take effect without the requirement of resetting the ONT.

Enter the configured static IP address in the address bar of the Internet Explorer. The login Web page is displayed. Enter the user name and password (The account is the default administrator account of the ONT). The configuration page is displayed.

Note:

1. Complete network security planning before enabling remote access control to ensure that ONTs are logged in to insecure network conditions. After the ONT login operations are complete, disable remote access control in a timely manner. If you do not complete network security planning or do not disable remote access control in a timely manner, the network may become faulty or be attacked, and Huawei will not be responsible for any related subsequences.

2. The above preceding configuration procedure uses the HG8245H as an example. The path menus and web pages of different ONT models may be different.

​How to configure URL filter on Huawei ONT?

How to configure URL filter on Huawei GPON ONT, here taking Huawei HN8245Q as an example. The operation steps are as follows:

1. Follow the navigation below to enter the settings page.

2. Fill in the Template name(The input here is test).

3. Set the time allowed to surf the Internet (The time when this template is not effective).

4. Enter the URL address(We can enter multiple URL addresses).

5. Switch to the Overview page and bind the template you just created.

If you want to apply it to the specified device, you need to fill in the MAC address of the specified device.

If you have other questions or problem about GPON OLT, no matter Huawei, Nokia or ZTE GPON ONT, you can contact Thunder-link.com, they maybe helpful.

How to configure port mapping on Huawei ONT?

This post will show you how to configure port mapping on Huawei GPON ONT.

Port Mapping

Port mapping allows extranet access to an intranet server (such as to a WWW server or FTP server on an extranet). The private IP address and service port of an intranet server is mapped into a public IP address and port, so that users from the extranet can access the intranet server. With port mapping, the public IP address but not the private IP address is visible to the users.

The following uses an example to describe how to configure the port mapping.

Configuration Example

User A installs a camera at home with IP address 192.168.100.100 and port 80. The ONT IP address is 192.168.100.1 (private IP address), the WAN IP address is 100.100.100.100, and the port number is 8080. To allow users to remotely check the camera footage, the required port mapping configurations are as follows:

Prerequisite

Huawei ONT such as HS8546V5 has been connected to the Internet.

Configuration Method

On the ONT web page, configure the port mapping.

Note: The web page may vary according to ONTs.

 

Type: To customize port mapping content, select User-defined; to implement port mapping for common services such as FTP, Telnet, and HTTP, select Apply. In this example, as the access object is a camera, set Type to User-defined.

 

Protocol: Select a protocol used for communication with the server (camera in this example). In this example, select TCP.

 

External Port number : Specify a port range used by extranet users to access the intranet server (camera in this example). In this example, only 1 port is used. Set External Port number** to 2000--2000.

 

Internal Port number: Specify a port range used by the intranet server (camera in this example). In this example, only 1 port is used. Set Internal Port number to 3000--3000.

 

Internal Host: Specify the IP address of the intranet server (camera in this example).

Extranet Access

After the configuration is successful, enter http://20.1.110.236:2000 in the address bar of the browser on a smartphone to access the camera and check the home. (20.1.110.236 is the ONT WAP IP address.)

Tips: The ONT WAN IP address can be queried in the status information.